Air valves

layer

Type AIL-S

Drum louvres are used for preference where the supply air from the diffuser has to travel a large distance to the occupied zone.This is the case in large rooms (halls, assembly rooms etc.), particularly when the supply of air via ceiling diffusers is not possible or not practical. Here Drum louvres are arranged in the side wall areas. 
 
When the temperature difference between the supply air and the room air changes, the air stream is deflected upwards, (for warm air) or downwards (for cold air). Also the directon of the air stream can be affected by other factors,eg: local convection effects or draughts within the room. For this reason, Trox Drum louvres are designed so that they can be adjusted to meet requirements for use in heating or cooling situations.Drum louvres are designed for handling large air volumes and long throws making them ideal for buildings with high ceilings such as Airport Terminal Buildings, Hotel reception areas, Shopping Arcades, Museums, Sports Centres and Departmental Stores. 

read more

layer

LVS

Circular disc valves with manually adjustable annular gap

  • Nominal sizes 100, 125, 160, 200 mm
  • Volume flow rate range 10 – 50 l/s or 36 – 180 m³/h
  • Diffuser face made of formed sheet steel, powder-coated
  • For variable and constant volume flows
  • For ceiling and wall installation
  • Easy to install
  • Volume flow rate balancing by simply turning the valve disc
  • Inexpensive solution for small rooms

read more

layer

Type AJA

Jet nozzles are used for preference where the supply air from the diffuser has to travel a large distance to the occupied zone. This is the case in large rooms (halls, assembly rooms etc.), particularly when the supply via ceiling diffusers is not possible or not practical. Here jet nozzles are arranged in the side wall areas. 
 
When the temperature difference between the supply air and the room air changes, the air stream is deflected upwards, (for warm air) or downwards (for cold air). Trox jet nozzles are designed so that they can be adjusted to meet requirements for use in heating or cooling situations. Jet nozzles are designed for handling large air volumes and long throws making them ideal for buildings with high ceilings such as Airport Terminal Buildings, Hotel reception areas, Shopping Arcades, Museums, Sports Centers and Departmental Stores.
 

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613