Type VDW

With low sound power level for comfort zones, with individually manually adjustable air control blades

Circular and square ceiling swirl diffusers for high room air change rates

  • Nominal sizes 12, 16, 20, 24, 25, 33 in.
  • Volume flow rate range 14 - 998 cfm
  • Diffuser face made of galvanised sheet steel, powder-coated
  • For supply and extract air
  • For variable and constant volume flows
  • For all types of ceiling systems, and with an extended border also suitable for freely suspended installation
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Air change rates of up to 35 per hour can be achieved by arranging several diffusers in a row with a minimum pitch of 3 ft (center line to center line)
  • Ideal for comfort zones


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colors, air control blades in black or white
  • Horizontal or vertical duct connection
  • Plenum box with cord-operated damper blade and pressure tap

VDW-Q-Z/500×24 00134073_0


  • Application
  • Description

Application

  • Type VDW ceiling swirl diffusers are used as supply air or extract air diffusers for comfort zones
  • Attractive design element for building owners and architects with demanding aesthetic requirements
  • Horizontal swirling supply air discharge for mixed flow ventilation
  • The efficient swirl creates high induction levels, thereby rapidly reducing the temperature difference and airflow velocity (supply air variant)
  • Individually adjustable air control blades to meet individual requirements
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –22 to 19°F
  • For room heights up to 13 ft (lower edge of suspended ceiling)
  • For all types of ceiling systems
  • With an extended border also suitable for freely suspended installation (supply air variant)

Special characteristics

  • Air control blades can be adjusted individually manually for adjusting the air pattern
  • For all types of ceiling systems, and with an extended border also suitable for freely suspended installation
  • Black or white air control blades
  • Air change rates of up to 35 per hour can be achieved by arranging several diffusers in a row with a minimum pitch of 0.9 m (center line to center line)

Nominal sizes

  • 12 × 8, 16 × 16, 20 × 24, 24 × 24, 24 × 48, 25 × 24, 25 × 54,      33 × 72 (in)


Variants

  • VDW-Q: Square diffuser face
  • VDW-R: Circular diffuser face
  • VDW-*-Z: Supply air
  • VDW-*-A: Extract air


Connection

  • H: Horizontal duct connection
  • V: Vertical duct connection

Parts and characteristics

  • Circular or square diffuser face
  • Diffuser face with individually manually adjustable air control blades
  • Simple installation of the diffuser face due to central fixing screw with decorative cap
  • Damper blade for volume flow rate balancing (optional)

Attachments

  • M: Damper blade for volume flow rate balancing (H, V only)
  • MN: Pressure tap and cord-operated damper blade for volume flow rate balancing with the diffuser face in place (H, V only)

Accessories

  • Lip seal

Construction features

  • Inlet suitable for circular ducts to ANSI/SMACNA 006-2006 and EN 1506 or EN 13180
  • Inlet with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

  • Diffuser face made of galvanised sheet steel
  • H, V, U: Plenum box and cross bar made of galvanneal steel
  • Air control blades made of plastic, UL 94, V-0, flame retardant
  • Lip seal made of rubber
  • Exposed diffuser face powder-coated RAL 9010, pure white
  • P1: Powder-coated, RAL CLASSIC color
  • Air control blades for supply air similar to RAL 9005, black; extract air variant without air control blades
  • Q11: Air control blades for extract air similar to RAL 9005, black
  • Q21: Air control blades for supply air and extract air similar to RAL 9010, white

Standards and guidelines

  • Inlet suitable for circular ducts to ANSI/SMACNA 006-2006 and EN 1506 or EN 13180

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613