Simplified handling, more applications TROX fire dampers – now even better than

back to the overview
date

29-10-2014

rubric

products

TROX fire dampers were recently certified for more applications, and inspection is even easier than before.

Take, for example, the optimised version of the rectangular FK-EU fire damper. The new construction features an inspection access panel with bayonet fixing that can be opened with one hand and hence facilitates inspection; it is no longer necessary to unscrew three wing nuts. The RM-O-3-D smoke detector will be installed with an adapter for the new inspection panel.

The fire damper may now also be installed into solid non-load-bearing walls with a flexible ceiling joint even if there is no lintel. A new installation kit allows for reducing the minimum distance to load-bearing structural elements to 40 mm. The fire damper may also be installed below solid ceiling slabs whereby the stainless steel duct is led vertically downward from the ceiling slab, then horizontally below the ceiling slab; the entire vertical section must have fire-resistant cladding.

The FKRS-EU has been optimised as well. In addition to the installation into lightweight partition walls with a flexible ceiling joint, it is also possible to install the fire damper with mortar (wet installation); the distance between two fire dampers and the distance to load-bearing structural elements has been reduced to 40 mm.

The FV-EU fire protection valves have been classified EI120S for installation into solid walls and lightweight partition walls.

The technical leaflets, the declarations of performance (DoP), and the operating and installation manuals have been updated accordingly. All documents can be downloaded from our website, www.troxtechnik.com. 

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +91 (0) 22 6775-1600 | Fax: +91 (0) 226775-1613